Redcliffe & Moreton Bay Area – Same-Day Service

Stormwater Drainage Solutions

DR Smith Plumbing and Roofing is based in Clontarf and works across the Redcliffe and Moreton Bay area.

15050088
QBCC licence
Redcliffe
On the peninsula
Stormwater Drainage Solutions
Where rainwater should flow
Where rainwater should flow

Stormwater drainage is the pipework under your yard that carries rain away from the house. It starts at the foot of each downpipe and yard grate and ends at the kerb or at a drain line along the back of the block. When it’s blocked or broken, or a downpipe has come loose from it, the water your roof sheds sits against the house instead.

Key facts about stormwater in Moreton Bay

  • Roof and other stormwater must flow through underground pipes to an approved discharge point.
  • The approved points are the kerb and channel, an inter-allotment drain, a Council drainage easement, reserve or table drain, or an on-site system such as a rubble pit.
  • An on-site disposal system has to be engineer-designed by someone with experience.
  • Discharging stormwater into the sewer is against the law.
  • Council approval is needed before connecting to Council stormwater drainage, and draining through a lower property needs that owner’s permission.

When rain isn’t leaving the yard

  • Water pooling beside or under the house after rain.
  • A downpipe spurting from its joint at ground level, or overflowing back at the gutter.
  • Yard grates that fill and back up instead of draining.
  • Soil washing out around downpipes or along the edge of a path.
  • A damp, musty space under a highset or timber house.
  • Puddles that sit long enough for mosquitoes to breed.

How a stormwater system works, and why it stops

Stormwater runs on gravity alone. Each downpipe drops into a pipe under the ground, and those pipes join and fall steadily towards the discharge point. Pits collect water from low spots in the yard and give access where pipes meet. Nothing pushes the water along, so a pipe that sags, silts up or loses its fall stops carrying it.

When a yard floods, the causes run roughly in this order. A blocked gutter outlet or a downpipe that has come apart at ground level is the most common. Next come pits full of leaves and silt, then roots and packed sand inside the pipe. After those come crushed or broken lengths, ground levels that now send water towards the house, and blocks with nowhere lawful for the water to go.

We tell them apart by running water in at each downpipe and grate and watching where it stops. Water that backs up at the first pit points to a blockage close by. Water that reaches the kerb slowly points to silt or roots along the run. Pooling with the pipes running freely points to the surface, not the pipe.

Following the water from roof to kerb

We rule out the roof side first, because a blocked gutter outlet or a downpipe that has come apart can look like a drainage fault down on the ground. Checking gutters means a ladder, so we book that part in. Once the roof side is clear, a hose goes into each downpipe and yard grate to see where the water comes out.

We scoop leaves and silt out of the pits, and clear roots and packed sand from the pipe. We narrow a damaged spot down before anyone picks up a shovel, so the yard is opened in one place. Then the trench goes down to it, the crushed or broken length is cut out and new pipe joined in.

New runs go in a trench with a steady fall all the way, bedded firmly so they don’t sag. Pits go where pipes meet or where the yard collects water, and each downpipe joins through an opening that can be reached again later. Before backfilling, we run water through the whole line to see it come out the far end.

Sometimes the pipe is fine and the trouble is on the surface, where something built later now sits across the water’s old path. Then a grated drain that catches the water before it reaches the wall may be the answer.

Stormwater fixes compared

Fix Suits Limits
Clear pits and pipe Leaves, silt, sand or roots in a pipe that is still whole Comes back if the pipe is broken or has lost its fall
Dig out and replace a length A crushed, broken or sagging section found by testing Means opening the yard, and paving or concrete adds work
Grated surface drain Water reaching a wall across paving or a changed surface Still has to be piped to an approved discharge point
On-site rubble pit or trench Blocks with no kerb or drain line to reach Has to be engineer-designed, and only works where the ground takes water

What makes a stormwater job bigger or smaller

  • A blocked pit or one loose downpipe is a short job.
  • Rock in the trench, or a slab or driveway to get under.
  • A long run to the street.
  • A block with nowhere easy for the water to go, or a pipe that has to cross a neighbour’s land.
  • Acid sulfate soils on low coastal land, which can attack concrete and steel.
  • Summer storms that bring down leaves and silt faster than pits can hold them.

Stormwater that needs a call during the storm

Water coming inside, or rising under a slab or into a subfloor during a storm, needs a call to us without delay. So does a downpipe emptying onto the sewer gully. A slow grate, or puddles that clear slowly, are a drain that isn’t coping, and can be booked in for dry weather, when the pipes are easier to trace.

Stormwater words you’ll hear

  • Kerb and channel: the concrete gutter along the street edge, one of Council’s approved discharge points.
  • Inter-allotment drain: a shared drain line, usually along the back or side of several blocks, that takes their stormwater.
  • Table drain: an open drain running beside a road.
  • Rubble pit: a buried pit filled with rock or gravel that lets stormwater soak into the ground.
  • Fall: the steady slope a pipe needs so water runs along it by gravity.
  • Overland flow: rain running across the surface of the land rather than through pipes.

What to know before we arrive

Who must do stormwater work is not settled in one place, so we confirm it for your property before work starts. City of Moreton Bay’s plumbing list puts “any work on stormwater drainage” in its unregulated group. The QBCC’s drainage licence scope includes stormwater drainage systems, and regulated drainage work must be done by a licensed drainer. The QBCC’s list of unregulated plumbing work does not mention stormwater.

Some parts are settled by Council approvals rather than by licensing. Builders are responsible for stormwater installations under a building approval. Connecting to Council stormwater drainage needs Council approval first, and an on-site disposal system must be engineer-designed.

Checks to make in the next downpour while you wait for us:

  • Watch from a window or a verandah, or go out only in light rain, never in thunder or lightning. Look at the foot of each downpipe, the yard grates and the low spots where water gathers.
  • Note where it pools and which way it runs, and film a few seconds on your phone.
  • In dry weather, look at each grate and pit and note any buried in leaves or silt.
  • Look at where each downpipe meets the ground. It should run into a pipe, not onto the round grate of the sewer gully.

Leave the digging to us. Before a dig we get the plans of the underground services on the block, because water pipes, cables and gas lines can run under any yard. Hold off on raising garden beds or ground levels too, as nothing may be built that interferes with overland flow, including fences, retaining walls, garden beds or landscaping.

Useful when you ring us about drainage:

  • Your rain video and a rough sketch of where the downpipes and grates are.
  • Anything built or landscaped since the problem started.
  • Whether the block slopes to the street or to the back, and any easement on your title.

A finished job leaves every downpipe running into a pipe that falls to an approved discharge point, with an opening to get back in at each downpipe. We flow-test the line before the trench is filled. Where it connects to Council drainage, Council’s approval is in place first.

The law on licensing closes the guide as it opened it. Council’s plumbing list calls stormwater drainage work unregulated, while the QBCC’s drainage licence covers stormwater systems and regulated drainage work needs a licensed drainer. We confirm which applies to your job, and any Council connection is approved first.

Stormwater beside gutters, sewer and tanks

When the yard turns into a pond after every storm, call DR Smith Plumbing and Roofing on 0483 965 800. We’re in Clontarf and work on homes across the Redcliffe peninsula and greater Moreton Bay.

Stormwater Drainage Solutions
Call 0483 965 800Request a quote
QBCC 15050088

Common questions

Call if your question is not covered here.

No. Stormwater must not discharge into the sewerage system, and doing it is against the law. It can overload the system and cause backups and overflows. Roof water belongs in the stormwater line, a separate set of pipes, so a downpipe found connected to the sewer has to be moved across.

It goes down the downpipes into pipes under the yard, then out to the kerb or into a drain line along the back of the block. Some properties use a soakage pit in the yard instead. That only works where the ground can take the water, and it has to be engineer-designed.

Look first at what has changed on the ground. New garden beds, a retaining wall, paving or soil heaped against a wall can turn water back towards the house. A blocked or crushed pipe under the yard does the same thing out of sight. Running water through the pipes and watching where it runs in a storm will often show which one it is.

For Council’s drainage, yes. Approval is needed before connecting to Council stormwater drainage, and discharge points may come with conditions. Draining through a lower neighbour’s property also needs that owner’s permission. Both come first, before any trench is dug towards the street.

The overflow can be piped to a suitable discharge point, so it doesn’t create a nuisance for neighbouring land or buildings. That means an inter-allotment stormwater drain or the street kerb and channel. Where neither is possible, it goes to a soakage pit set as far as practicable from buildings and boundaries.

Where we work

DR Smith Plumbing and Roofing is based in Clontarf on the Redcliffe peninsula and works across the Moreton Bay area. For Stormwater Drainage Solutions in Clontarf or one of the suburbs below, call 0483 965 800. The same number covers plumbing and roofing jobs.

Map of our Clontarf base. Opens Google Maps

Click map view in Google maps

Roofing services

Steel roof repairs, re-roofing and gutters from the team you already call for plumbing, based in Clontarf.

See all roofing services

SPEAK TO US TODAY!

We look after both your plumbing and your roofing, so there is one number to call for either job: 0483 965 800.